abnormal-load-escorts-10-axel

DCS Special Projects were tasked with ensuring the safe passage of a 140t 4.4m wide Press base from Harwich Intentional Port to a Metal Recycling facility in Birmingham, once DCS Special Projects received the trailer combination and dimensions the client requested that route assessment was carried out to ensure both the Truck and Load could pass without any hindrance.

The base was transported on a 10 axle modular trailer with a 4 axle MAN tractor unit due to number of axles the total length of the transport then became 27meters long, DCS took all of these factors into account on the route assessment and found that trying to move the load into Birmingham during the day would be extremely challenging and would cause unnecessary disruption to one Birmingham’s busy arterial public transport and commuter routes, Because of this the only option was to bring the Base in during the early hours of the morning when traffic is at its quietest.

The length of the journey meant that the trip had to be split into two half’s leaving Harwich at 09:30 with two of DCS Abnormal Load Escort vehicles and making their way to Corley Services on the M6 providing the driver with a safe environment to have their 9hour break from driving due to load having to begin again at 00:00 the transport had to be parked in Corley by 15:00 at the latest.

The Base left Corley at 00:00 onto the M6 then onto the M42 then to the A45 towards Birmingham’s city Centre winding their way through the bus lanes and traffic calming finally arriving at the metal recycling facility at 04:30 where the prior organised parking had been placed to allow the crane to enter before the base and be rigged up at 07:00 once the crane was rigged DCS Special projects Steersman then assisted the driver of the truck to precisely place the trailer into the designated lifting area and remove the chains.

Once the base had been lifted off of the transport the steersman again assisted the driver of the truck steering the trailer from underneath the crane and aligning the fully steerable axles straight and prepared the trailer for travelling.

DCS Abnormal Load Escort vehicles then escorted the truck and trailer back out of Birmingham to the M6 motorway.

abnormal-load-escorts-eu

DCS Abnormal Loads Escorts is now launching a new Service to work in partnership with Pilot Services Holland.

Pilot Services Holland are based near Amsterdam.

In conjunction with Pilot Services Holland, DCS is now able to provide Abnormal Load Services within the UK and also across Europe with onward to Ireland.

Peter Priest head of DCS Abnormal Loads Escorting attended the Truckstar show in Holland in October.

During the Truckstar show Peter and his Assistant Manager Carl Garrod explored the tremendous advantages with Win Bakker owner of Pilot Services Holland of providing Europe wide services.

This partnership resulted in DCS and PSH now being a one stop shop supply to all UK haulage companies exporting abnormal loads into Europe and working with Europe based haulage companies importing into the UK.

This merging of services and working systems has made it extremely easy for client companies to access a one stop shop for all their Escort requirements including obtaining Road Planning Permits, advice regarding heavy haulage  requirement’s and  Regulations.

From now on exporting Abnormal Loads from the UK to Europe and importing from Europe to the UK has never been made so easy for the client with DCS Abnormal Loads Escorts and Pilot Services Holland supplying the required escort services and support statutory planning and documentation.

So please send us your European Abnormal Load enquires to projects@dcslogistics.co.uk and see just how easy working as a complete team can be.

abnormal-load-escorts-news-001

Abnormal Loads Cross Industry Forum and working group

Following the meeting of the Abnormal Loads Liaison Group, the haulage industry and other key stakeholders including highways, structure owners and enforcement authorities in April, it became clear that there were many issues affecting the abnormal load industry.

In an effort to address these concerns and to improve the efficiency and effectiveness of this important industry’s contribution to the UK economy, the Abnormal Loads Cross Industry Forum and working group has been established to develop an industry code of practice to benefit the whole of the distribution network and its players.

The plan is to consider all aspects of the industry, including the movement notification procedures, the response of police and structure owners, compliance, enforcement, and the many others factors that affect this highly skilled profession. Everyone in the industry has the opportunity to help develop and influence this review with the intention of ultimately bringing about long awaited and far-reaching improvements.

The views of those involved in the movement of abnormal loads in the UK are important and are encouraged to contribute to this far reaching review. Ray Engley of the Road Haulage Association has agreed to act as coordinator with the support of the Heavy Transport Association, the Freight Transport Association and many allied and interested groups.

 

abnormal-load-escorts-news-001

DCS Special projects where involved in the placement of a switch room in the rural Worcestershire country side from start to finish. This particular job started in Leicester and involved the crews assisting  Leicester Heavy Haulage on moving the switch room out of site and along its route to Worcestershire, the switch room due to the tight location alongside the railway was required to be loaded on a 10 axle bogie with a drawbar hitch connection to the 4 axle MAN.

After leaving the M5 motorway the special project crew was joined by one of our escorts who assisted in winding the load down through the twisting lanes to the railways site. On arrival at the special projects crews steersman was put to work alongside Leicester heavy haulage’s steersman and tasked with getting the load in to the jacking position. The two steersman where necessary as the 10 axle bogie has to be steered at both ends commonly known as a counter steering trailer. The two steersman and the lorry driver all communicate using radios steering the load in to position with millimetre accuracy.

The load was then unchained and the jacking teams then got to work jacking the switch room up to a position so that the trailer could be pulled from underneath and the wrapped up ready for leaving site.

After steering the trailer out of site there was not enough room to turn around so the steersman had to steer and guide the truck 1.5 miles in reverse back up the lane to a point big enough to turn around, the empty trailer and truck was then escorted back out to the M5.